Category: TRADITIONAL REFRIGERATION SYSTEMS
Notes: EASY SYSTEM: perfect sealing during opening and closing of the tap thanks to 2 o.rings on the stainless steel operating stem100% GUARANTEED RELIABILITY AND SAFETY the opening and closing operations are always sealed
100% TESTED using a dedicated helium plant
100% TRACEABLE by serial number and batch date which certify the passing of the test
RECIVER VALVE AND STOP VALVE
YELLOW BRASS BODY
CONTROL STEM MADE OF STAINLESS STEEL AISI 303 WITH DOUBLE NEOPRENE OR
OLAB CETIFICATED
BRASS CAP WITH OR SEAL
DESIGNED FOR PROFESSIONAL REFRIGERATION SYSTEMS
SAFE SEALING: guaranteed by a EPDM OLAB certificated double O-ring seal between
the valve body and pin
ANTI-TAMPERING: when the valve is fully open, the pin can be pulled off thanks to
the double edge-bandin of the upper part of the valve body
COMPACT: the whole manoeuvring system is inside the valve body and
the pin can be operated using an Allen wrench
100% TESTED, with modern 100% helium plant, each valve bears the
date and serial number proving that it has passed the test and allowing
traceability of the performance data measured during testing over
time.
The receiver valves in the series 43100 are designed to be installed on refrigeration and air-conditioning system for
domestic and industrial use. It’s possible to use them with all the refrigerant fluids of group 2 of Art.13, Chapter 1,
point B, of European Directive 2014/68/EU, with reference to EC Regulation no. 1272/2008.
Below i s a list of the main refrigerant gases that can be used:
HCFC
HFC
HFO,
HFO/HFC blends,
HC
The main construction components of the receiver valves in the 43100 series are:
Make sure the refrigeration/conditioning system is properly clean before installing the valve with a 2/2way screw plug. The presence of impurities could affect the sealing of the valve. Valve opening/closing is very easy: you only need to remove the protection cover and rotate the pin clockwise to close the valve and anti-clockwise to open it, using an Allen wrench. Then remount the protection cover.
RECIVER VALVE AND STOP VALVE
YELLOW BRASS BODY
CONTROL STEM MADE OF STAINLESS STEEL AISI 303 WITH DOUBLE NEOPRENE OR
OLAB CETIFICATED
BRASS CAP WITH OR SEAL
DESIGNED FOR PROFESSIONAL REFRIGERATION SYSTEMS
SAFE SEALING: guaranteed by a EPDM OLAB certificated double O-ring seal between
the valve body and pin
ANTI-TAMPERING: when the valve is fully open, the pin can be pulled off thanks to
the double edge-bandin of the upper part of the valve body
COMPACT: the whole manoeuvring system is inside the valve body and
the pin can be operated using an Allen wrench
100% TESTED, with modern 100% helium plant, each valve bears the
date and serial number proving that it has passed the test and allowing
traceability of the performance data measured during testing over
time.
The receiver valves in the series 43100 are designed to be installed on refrigeration and air-conditioning system for
domestic and industrial use. It’s possible to use them with all the refrigerant fluids of group 2 of Art.13, Chapter 1,
point B, of European Directive 2014/68/EU, with reference to EC Regulation no. 1272/2008.
Below i s a list of the main refrigerant gases that can be used:
HCFC
HFC
HFO,
HFO/HFC blends,
HC
The main construction components of the receiver valves in the 43100 series are:
Make sure the refrigeration/conditioning system is properly clean before installing the valve with a 2/2way screw plug. The presence of impurities could affect the sealing of the valve. Valve opening/closing is very easy: you only need to remove the protection cover and rotate the pin clockwise to close the valve and anti-clockwise to open it, using an Allen wrench. Then remount the protection cover.
